|
There are several reinforcement modes which have different functionality when placing blocks. By default, you are in normal mode, which will not allow you to reinforce any blocks. To reinforce blocks, you must switch to a particular reinforcement mode.
{| class="wikitable"
|+
!Mode
!Command
!Functionality
|-
|Fortify
|/ctf [group]
|Enters fortify mode with the reinforcement material held (or fails if not holding any). While on, automatically reinforce blocks placed on [group] or your default group with the selected material. Fortify mode exits when a reinforcement is failed. Allows reinforcing both sides of a double chest ▼|-
|Reinforce
|/ctr [group]
|Enters reinforcement mode. On reinforcement mode reinforce blocks on [group] or your default group by punching or right clicking them with a reinforcement material ▼|-
|Easy
|/cte
|Enters easy reinforcement mode. On easy reinforce you can hold a reinforcement material on your off-hand and fortify blocks you place on your default group. You can also hold the reinforcement material on your main-hand and punch blocks to reinforce them on your default group, unlike ctr this won't generate warnings when attempting to interact with blocks without a reinforcement material, letting you leave it on, however doing so may lead to accidental reinforcement ▼|-
|Advanced
|/cta [group]
|Enables fortifying the block held in your main hand with the material held in your off-hand on [group]. Behaves like fortify mode while allowing you to choose individual groups and different reinforcements (or, by default, none) for each individual block type ▼|-
|Patch
|/ctp
|Repairs damaged reinforced blocks interacted (left or right click) with if you have the reinforcement material in your inventory. The chance of consuming the material is proportional to how damaged the block is. ▼|-
|Normal
|/cto
|Exits any reinforcement mode. By default also disables information mode if enabled but this can be changed in /config ▼|}
===<h3> Fortify Modemode ===</h3>▼{{Hatnote|Command: /ctf [group]}}
▲|EntersThe fortifycommand modemust withbe therun while holding a [[#Material|reinforcement material ]] held (or failsit ifwill not holding any)fail. While on,in automaticallyfortify reinforcemode blocks placed onare [automatically reinforced to the selected <code>group ]</code> or your default group with the selected material. Fortify mode exits when a reinforcement is failed. Allows reinforcing both sides of a double chest
▲===<h3> Reinforce Modemode ===</h3>
The most common mode is reinforce mode, entered via <code>/ctr</code>. When in this mode, you can reinforce blocks by punching them with a reinforcement material.
{{Hatnote|Command: /ctr [group]}}
▲|EntersOn reinforcement mode . Onyou reinforcement modecan reinforce blocks onto [the selected <code>group ]</code> or your default group by punching or right clicking them with a reinforcement material , note that this mode will prevent you from breaking or interacting with blocks normally
===<h3> Easy Modemode ===</h3>
{{Hatnote| Command: /cte}}
▲|EntersUnlike easyother reinforcementmodes modethis only allows reinforcing to your default group. On easy reinforce you can hold a reinforcement material on your off-hand and fortifyautomatically reinforce blocks you place onwith your default group. You canit, alsoor hold the reinforcement material on your main-hand and punch blocks to reinforce them . onUnlike yourReinforce default group, unlike ctrmode this won't generate warnings when attempting to interact with blocks without a reinforcement material, letting you leave it on ,. howeverHowever, doing so may lead to accidental reinforcement
===<h3> Advanced Modemode ===</h3>▼Use <code>/cte</code> or <code>/cteasy</code> to enter this mode. Easy mode is like a permanent reinforce mode - it acts like reinforce mode in that you can punch blocks with reinforcement materials to reinforce them, but it will not give you error messages whenever you punch blocks with an item that is not a reinforcement material. If you enter this mode and forget about it, be careful about punching things with valuable reinforcement materials like diamonds!
{{Hatnote| Command: /cta [group]}}
▲|EnablesThe fortifyingcommand must be run while holding the type of block heldyou intend to reinforce in your mainmainhand handand witha thereinforcement material held in your off-handoffhand, onyou [group]may do so again to add more targeted block types. BehavesAdvanced mode behaves like fortify mode while allowing you to choose individual groups and different reinforcementsreinforcement types (or, by default, none) for each individualtype block typethere is.
<h3> Patch mode </h3>
{{Hatnote| Command: /ctp}}
▲|Repairs damaged reinforced blocks interacted (left or right click) with if you have the reinforcement material in your inventory. The chance of consuming the material is proportional to how damaged the block is.
<h3> Normal mode </h3>
Fortify mode will reinforce all blocks placed with a specific reinforcement material while in fortify mode. To enter this mode, hold a reinforcement material in your hand and type <code>/ctf</code> or <code>/ctfortify</code>.
{{Hatnote| Command: /cto}}
▲|Exits any reinforcement mode. By default also disables information mode if enabled but this can be changed in /config
While double chests can normally only be reinforced once, it is possible to reinforce both blocks of a double chest by placing both chests while in fortify mode.
Advanced mode is similar to fortify mode, but allows matching an arbitrary number of block types with different reinforcements. To enter this mode, hold a reinforcement material in your off hand and a block in your main hand, then type <code>/cta</code> or <code>/ctadvanced</code>. While in this mode, whenever a block of the selected block type is placed, it will be reinforced with the selected reinforcement material. Unlike fortify mode, only this block will be reinforced when placed, not all blocks.
You can repeat this process to assign as many block/reinforcement pairs as you want. This means that you could reinforce iron doors with diamond and obsidian with stone while in the same mode, for instance.
All block/reinforcement pairs are forgotten when you exit out of advanced mode, and must be re-associated again whenever you re-enter advanced mode.
== Toggle Modes ==
|